D2-8F FLOORPLATE TWO-POST LIFT

Overview
Two-Stage Telescoping Screw Pad Assembly Kit
The D2-8F two-post lift utilizes Dannmar’s double-telescoping screw pads. Dannmar’s pads are rugged and resist hard use and gouging. Strong construction ensures safe operation. The 63 mm adapters are stackable and include a standard set to accompany each lift, helping reach the lifting points on most any vehicle.

Triple-telescoping front arms and two-stage rear arms
Multi-stage arms are adaptable enough to work with several vehicle types. The arm sweep and minimum arm reach on this lift are extended, so the arms can lift most unibody vehicles. They typically will reach factory-recommended lift points and work with a range of wheelbases.

Low-profile, dropped-end frame contact pads
From daily drivers to race cars to high-performance import sedans, Dannmar’s car lift has the versatility to slide under your chassis without damaging your vehicle’s undercarriage or frame.

Lowered arm tube supports
Dannmar’s tube arms have been redesigned to make it easier to open doors when vehicle lift points are engaged. This is especially useful if your vehicle has low-opening doors. Dannmar makes every effort to prevent damage to your vehicle’s body with the two-post lift design.

Features
Electric / hydraulic power system
Large, 17″ x 19″ A36 steel base plate
Self-lubricating dura-glide UHMW polyethylene bearings
Safety locks in each column spaced every 3”
Automatic arm restraints
Heavy-duty 1/2″ aircraft-quality equalizer cables
Oversized cable sheave diameter reduces cable fatigue
4-piece 63 mm stackable adapter set comes standard
Telescoping arm design for more versatile arm positioning
Single-point safety release
Drop-end arms provide a lower pad height
Dual hydraulic direct-drive cylinders
Oversized 53″ tall carriage for superior strength
Triple-telescoping arm design
Versatile drop-in contact pads with stackable adapters.
Specs
Style Floorplate
SKU# 5175316
Lifting Capacity 8,000 lbs. (3,629 kg)
A – Lowered Height + Pad 4.25” (108 mm)
B – Max. Lift Height (Top Lock) 80.5” (2,045 mm)
C – Max. Rise 72” (1,829 mm)
D – Height Overall 123” (3,128 mm)
E – Width Overall 132” (3,353 mm) or 145” (3,683 mm)
F – Width Outside Columns 126.75” (3,219 mm) or 139.75” (3,550 mm)
G – Width Inside Columns 105” (2,667 mm) or 118” (2,997 mm)
H – Drive-Thru Clearance 93” (2,362 mm) or 106” (2,692 mm)
I – Floorplate Width 8.5” (216 mm)
J – Floorplate Height 1.25″ (33 mm)
K – Arm Reach 32.25″ (819 mm) – 52.25” (1,327 mm)
Max. Load per Arm 2,000 lbs. (907 kg)
Time to Full Rise 45 seconds
Noise 45 dB
Motor 220 VAC / 60 Hz / 1 Ph
Shipping Weight 1,733 lbs. (786 kgs)
Shipping Dimensions 117″ x 25″ x 36″ (2,971 mm x 635 mm x 914 mm)
Dannmar D2-8F two-post lift floor diagram